Witmer Products.inc.
AboutSport anchor beach umbrellanewspaper paperguardnatural peanut butter hand mixer


To purchase, click on the
"ADD TO CART" icons shown
below each item.

OR
please send
check or money order payable
to RW Witmer LLC
(please add $5.95 for S/H for 1 mixer. For multiple mixers or other items, please email for S/H information.)

P-butter Mixer,
P.O. Box 444,
Orrville, Ohio 44667.


For more information,
e-mail
oldpbmixer@gmail.com

A replacement lid assembly
which includes a new gasket
and snap liner can be
purchased separately.
Please see Parts Section
below for the sizes available.

A single replacement gasket
can also be purchased.
Please see Parts Section.



*Bag printed in Ohio but may
have multiple origins


Perfect for storing your nut butter
mixers and parts together,
a 6" x 10" printed cloth bag with
drawstring, can be purchased.
Please see bottom of page.


Store Accounts and Wholesale
Vendors Welcome

Recommended Mixers by Brand (PDF)

All peanut butter mixers
shown will fit most
natural peanut butter
brands including
Smucker's, Laura
Scudder, Adams, and
others. Please review
the description of each
mixer and select the
correct model for the
size jar and lid
you normally use.

If you need assistance
please contact us.




For fast, easy
on-line payment
use Paypal
or credit card
by clicking on the
"ADD TO CART"
icon below each
item.




All products in this site are made in the USA

Mixer Directions:

For Crank Mixers:
Insert mixing rod through opening in lid. Dip the mixer rod tip in peanut oil for lubrication. Slide white gasket on rod until up against lid. Slide plastic lid liner on rod and snap into lid. Place lid assembly on top of jar and fasten by turning clockwise. Stir by rotating handle with a slight downward pressure. The jar can be held upright or sideways until mixed thoroughly. After stirring, remove mixing rod by pulling upward. Unscrew lid from jar. Remove plastic lid liner and white gasket for cleaning.
(see the PDF Instructions)
Lid artwork subject to change

For Twist Mixers:
The gasket is fastened to the lid. Dip mixer tip in peanut oil before inserting. Rotate and move handle up and down until the peanut butter has been mixed thoroughly. To reach all areas of the jar, angle the bottom of the mixer towards the sides. Settling of the product may make the first turn more difficult. Remove lid liner and clean gasket, liner and lid. (Not recommended for dishwashers) Note: After extended use, replacement lids may be obtained from the manufacturer.

(see the PDF Instructions)

Lid artwork subject to change



Oil separation is a natural occurrence in non-hydrogenated peanut butter. This innovative new device will easily stir the peanut butter in the original container
without splashing the oil. It conveniently cleans the mixing
rod upon removal from the jar. These features will help you
enjoy your experience with
Natural Peanut Butter
.


WirecutterAs seen in The NY Times Wirecutter

All mixers listed below feature a stainless steel or chrome-plated stirring rod. A coated-steel or polymer lid provides rigid support for the hand mixer and a durable molded plastic knob spins freely to facilitate turning the crank. (The twist-knob mixers utilize hardwood knobs). A bearing collar on the mixing rod seats snugly inside a chrome-plated lid grommet to provide a smooth, even rotation. A white nitrile gasket made from FDA approved materials is fastened underneath the lid and effectively cleans all peanut butter from the mixing rod upon removal from the jar. For additional convenience a How to measure jar lid - Measure the inside diameter.polypropylene liner is easily released by pulling a side tab to facilitate cleaning the peanut butter from underneath the lid.

Instructions: Carefully measure the inside diameter of your existing nut butter jar lid.

Get the right fit!
Click here for the Recommended Mixers by Brand (PDF)
                

Models Available


Model 100 Crank Mixer

Our most popular mixer, this unit is designed to fit the 16 oz. jar that is 4.75 inches high with a 77 mm. (3 inches) diameter lid.


$13.00 plus shipping








Model 300 Crank Mixer

This mixer stirs a wide variety of nut butters that are packaged in 16 oz. or 18 oz. jars with the small mouth, 70 mm. (2-3/4 inches) diameter lid opening.


$12.75 plus shipping




Mixer Combo Pack

Unsure which Witmer mixer to buy for your 15-ounce, 16-ounce, 18-ounce, or 500-gram glass or plastic nut butter jars? This Combo Pack helps by providing the right mixing rod, two lids (70 mm and 77 mm), gaskets, lid liners, and a silkscreened imprinted storage bag to neatly hold the parts. Note: before ordering, please see the link "recommended nut butter mixers by brands and jar sizes" for Models #100 and #300 this Combo Pack fits.


$18.50 plus shipping



Model 400 Crank Mixer

This mixer has the same features as models #100 and #300 but has a longer rod to stir natural peanut butter in the 26 oz. jar with an 83 mm. (3-1/4 inches) diameter deep well, ribbed plastic lid.
(Nut butters in larger jars can become heavily settled, which may make the initial turns more difficult.  Before opening, place the jar upside down for a few days to help break up the hardest material)

$13.25 plus shipping




Model 500 Twist Knob Mixer

This mixer utilizes an up and down plunging motion to mix the oils in natural peanut butter and works especially well with stiff, heavily settled product. It can be angled to reach all areas of the jar. Some consumers like having both models (#400 and #500) available to mix the 26 oz. jar with the 83 mm. (3-1/4 inches) diameter deep well, ribbed plastic lid. It also fits some 27 oz. and 28 oz. brands. It comes with a beautiful hardwood knob that is easy to grasp. New and improved stainless steel mixing rod with a spare gasket now included.

$14.00 plus shipping




Model 600 Twist Knob Mixer

This mixer utilizes an up and down plunging motion to mix the oils in natural peanut butter in the large 36 oz. jar with the 100 mm. (4 inches) diameter lid and works especially well with stiff, heavily settled product. It comes with a beautiful hardwood knob that is easy to grasp. New and improved stainless steel mixing rod with a spare gasket now included.

$14.25 plus shipping



Model 700 Twist Knob Mixer

This mixer utilizes an up and down plunging motion to mix the oils in natural peanut butter in the very large 5lb. (80 oz.) jar with the 110 mm lid (4 3/8 inches diameter) and works well with stiff, heavily settled product. It comes with a beautiful hardwood knob that is easy to grasp. New and improved stainless steel mixing rod with a spare gasket now included.

$14.35 plus shipping





Model 800 Twist Knob Mixer

This mixer utilizes an up and down plunging motion to mix the oils in natural peanut butter for jars with a lid inside diameter of 89 mm (3 1/2 inches). Depending on the the brand, this mixer will fit 26 oz., 36 oz., 40 oz., and 1 kg. jars. New and improved stainless steel mixing rod with a spare gasket now included.

$14.45 plus shipping




Model 50 Twist Knob Mixer for 12 oz. jars

This mixer utilizes an up and down plunging motion to mix the oils in natural peanut butter in the small 12 oz. jar with the 77 mm (3 inches) diameter lid. The mixer features a beautiful hardwood knob with a clear urethane factory finish.

$13.60 plus shipping


Need additional parts?


Replacement Gasket....... If your lid is still in good condition but the gasket has failed over time, you can obtain a new gasket. Simply position the replacement gasket in the lid and use the lid liner to keep it in place. One size fits all lids.
$1.50




Replacement Lid Liner with tab
$1.25




Part A.......70 mm. (2-3/4 inches) Replacement Lid Assembly for Model 300 or regular mouth mason jar opening. (lid, gasket, lid liner)
$3.75



Part B.......77 mm. (3 inches) Replacement Lid Assembly for Model 50 and Model 100. (lid, gasket, lid liner)
$3.75



Part C.......83 mm. (3-1/4 inches) Replacement Lid Assembly for Model 400 and Model 500. (lid, gasket, lid liner)
$3.75



Part D .......100 mm. (4 inches) Replacement Lid Assembly for Model 600. (lid, gasket, lid liner)
$3.75



Part E .......110 mm. (4 3/8 inches) Replacement Lid Assembly for Model 700. (lid, gasket, lid liner)
$3.75



Part G .......89 mm (3 1/2 inches) Replacement Lid Assembly for Model 800. (lid, gasket, lid liner)
$3.75



White Cloth Storage Bag....... perfect 6" x 10" size for storing your nut butter mixers and parts.
$3.75


© 2003 Witmer Products Inc. All rights reserved.